MODELLING AND ANALYSIS OF HEAVY VEHICLE CHASSIS FOR COMPOSITE MATERIALS FOR HEFTY LOAD CIRCUMSTANCES

Harish Harsurkar, G Srikanth Reddy, Sadhu Prashanth Raj

Abstract


The composite cloth is a cloth composed of or more excellent stages and having bulk homes considerably great from the ones of any of the components. Different sorts of composite material are to be had and in fact, considered one of its far polymer matrix composites. It can be very well-known due to their low rate and smooth fabrication strategies. It has the advantages of immoderate tensile energy, excessive stiffness, and particular corrosion resistance and so on. A gift, this polymer matrix composite fabric is implemented in aerospace, vehicle industries because of its miles the immoderate energy to low weight ration. For cars, chassis includes an assembly of all the essential factors of a truck to be prepared for operation on the street. In our mission, format, and model the heavy vehicle chassis with the useful aid of the use of seasoned/engineer software program software, through taking the information from the l & t heavy car version by using the use of opposite engineering techniques. Presently used the material for chassis is metallic. The critical motive is to replace the chassis cloth with im 7 fiber & 997 epoxy. By using metallic, the weight of the chassis is more in assessment with im 7 fiber & 997 epoxy, due to the fact its density is greater. Structural and modal assessment is finished on chassis for optimizing the above parameters beneath the 10tons load. And we're using layer stacking approach for 3 and five layers for evaluation of im 7 fiber & 997 epoxy.


References


NitinTenguriaet.Al.“Design and Finite Element Analysis of Horizontal Axis Wind Turbine blade” International Journal of Applied Engineering Research, Dindigul Volume 1, No 3, 2010 ISSN 09764259.

Mr. Jesus Vega Fuentes,et.Al. “Design of wind turbine blades of an energy of a thousand watts for home use.” 978-1-61284- 1325-5/12, 2012 IEEE.

Mr.V. DíazCasás, et.Al. “Automatic Design and Optimization of Wind Turbine Blades” International Conference on Computational Intelligence for Modelling Control and Automation, and International Conference on Intelligent Agents, Web Technologies and Internet Commerce 0-7695- 2731- zero/06, IEEE.

Arvind Singh Rathore et al., “Design and Analysis of Horizontal Axis Wind Turbine Rotor”., International Journal of Engineering Science and Technology (IJEST) Vol. Three No.Martinmas 2011 ISSN : 0975-5462.

Jialin Zhang, et.Al. “Design and Research of HighPerformance Low-Speed Wind Turbine Blades. “November 2011.IEEE.

Sairam Kotari, V.Gopinath,"Static and dynamic analysis on Tatra chassis" International Journal of Modern Engineering Research (IJMER), Vol.2, Issue.1, pp-086-094.

K.W. Poh, P.H. Dayawansa, A.W. Dickerson, I.R. Thomas, Steel membrane floors for our bodies of massive rear-promote off mining cars, Finite Elements in Analysis and Design 32, (1999), 141-161.


Full Text: PDF

Refbacks

  • There are currently no refbacks.




Copyright © 2012 - 2021, All rights reserved.| ijitr.com

Creative Commons License
International Journal of Innovative Technology and Research is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJITR , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.