Basawaraj S Hasu, S Mohan Kumar, Pandula Vamshi Krishna


Grinding is the machining procedures which beautify ground exceptional and dimensional accuracy of the workpiece. Various process parameters, that have an impact at the cylindrical grinding operation, are the depth of lowering, cloth hardness, workpiece pace, and grinding wheel grain duration, a huge type of passes, material elimination fee and grinding wheel tempo. Speed and feed are essential factors because growing at each pace, and feed has a damaging effect on floor roughness but high fabric elimination reason a reduction in surface roughness. Cylindrical grinding is one of the important metallic lowering tactics used substantially within the finishing operations. Metal removal charge and surface end are the critical output responses in the manufacturing with admire to quantity and extraordinary.  In this thesis, is to arrive at the most effective grinding conditions in an effort to limit ground roughness and maximize steel elimination price even as cylindrical grinding of EN21AMsteel is finished for the optimization of grinding procedure parameters. During this experimental art work input approach parameters i.e. Speed, feed, the depth of cut is optimized the use of the Taguchi method.


P. Comley, I. Walton2, T. Jin, D.J. Stephenson, “A High Material Removal Rate Grinding Process for the Production of Automotive Crankshafts”, Annals of the CIRP Vol.55/1/2006

M. N. Dhavlikar, M. S. Kulkarni and V. Mariappan, Combined Taguchi and twin response method for optimization of a centerless grinding operation Journal of Materials Processing Technology, Volume 132, Issues 1- three, 10 January 2003, Pages ninety-ninety four

M.Janardhan, A.Gopala Krishna, “Determination and optimization of cylindrical grinding process parameters the use of taguchi technique and regression evaluation”, ISSN 0975-5462, extent 3, web page 5659-5665.

A.J.Shih, M.B.Grant, T.M.Yunushonis, T.O.Morris, S.B.McSpadden, “Vitreous bond CBN wheel for excessive pace grinding of Zirconia and M2 Tool Steel”, Transactions of NAMRI/SME, Vol. 26.

Jae-Seob Kwak, Application of Taguchi and response surface methodologies for geometric mistakes in surface grinding process, International Journal of Machine Tools and Manufacture, Volume45,Issue3, March2005, Pages327-334

Jae –Seob Kwak, An evaluation of grinding power and surface roughness in outside cylindrical grinding of hardened SCM 440 Steel using the reaction floor technique., international magazine of system tools &manufacture 46 (2006) 304-312.

N.Alagumurthi, K. Palaniraja and V.Soundararajan, cylindrical grinding – an assessment on floor integrity. International magazine of precision engineering and production vol. No 3.

Full Text: PDF


  • There are currently no refbacks.

Copyright © 2012 - 2021, All rights reserved.| ijitr.com

Creative Commons License
International Journal of Innovative Technology and Research is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJITR , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.