G Srikanth Reddy, Bolleddu Janaiah, Nemalikonda Omkar


Almost all fabrication of structures these days consists of welding. Therefore the effects of welding at the existence of structures subjected to cyclic loading have to be taken into consideration for the cheap and relaxed layout. The full-size majority of factor fatigue disasters take area on the welded connections at the same time as the welded systems subjected to fatigue and effect loading. The cause of this task is the check of the impact of the vicinity of the welding joint on the fatigue existence and fatigue energy of metal plates and locating the great place for welding joint. The scope of these paintings is applied mechanics and the layout of the welding joint location. The welding joints modeling in SOLID WORKS software program and assessment in ANSYS software program application software program. The welding quantities substances are metallic And applying the simplest-of-a-kind loads (60N, 80N, 100N, 120N) at the welded plates for finding the energy, life of the issue. Static analysis to determine the deformation, stress, and stress when we using hundreds to the element. Fatigue assessment to decide the life, harm, and safety factor to estimate the lifestyles of the issue on the same time as utilizing the repeated cyclic hundreds.


H. Tada, P. C. Paris and G.R. Irwin, "The Stress Analysis of Cracks Handbook", Del Research Corporation, Hellertown, Penna. (1973).

D.E Rooke and D.J. Cartwright, "Compendium of Stress Intensity Factors", Her Majesty's Stationery Office, London (1976).

G.C. Sih, "Handbook of Stress Intensity Factors", Institute of Fracture and Solid Mechanics, Lehigh University (1973).

T. Matsumoto, F. Suzuki, Y. Wadayama, H. Sato, and M. Tsukamoto, Undermatched Joints in Superconducting Coil Cases of Fusion Reactors, Welding Int., Vol 6 (No. Nine), 1992, p seven-hundred–706.

Y.J. Kim, “Strength Mis-Match Effect on Local Stresses and Its Implication to Structural Assessments,” IIW Doc. Sc.X-F-081-98, International Institute of Welding, 1998.

G.X. Cheng, Z.B. Kuang, Z.W. Lou, and H. Li, Low Cycle Hysteresis Energy for Welded Joint With Mechanical Heterogeneity, Acta Metall., Vol 29 (No. 7), 1993, p A328-A333.

J. Onoro and C. Ranninger, Fatigue Behaviour of Laser Welds of High Strength Low Alloy Steels, J. Mater. Proc. Technol., Vol sixty eight, 1997, p 68–70.

Full Text: PDF


  • There are currently no refbacks.

Copyright © 2012 - 2021, All rights reserved.|

Creative Commons License
International Journal of Innovative Technology and Research is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJITR , Permissions beyond the scope of this license may be available at