R Santhi, B Ramesh, Faraz Hussain


Welding is the metallic becoming a member of way in which or greater metallic having the equal cloth or super may be joined through heating to plastic America of America. It is normally used for becoming a member of metals in the technology enterprise, in fabrication, maintenance, restore of parts and systems. The steel plates and pipes used in the generation industry and that they have got welding electricity as their essential parameter. In this thesis, the welding velocity and geometry to find out tensile and effect power in case of butt weld joint might be finished. For V-groove geometry specific fashions of the plate with numerous covered angles from 350, 450, 500will be crafted from structural metal. A sort of techniques is used in the literature to clear the troubles associated with optimization of the parameters. It is placed that an assessment of the shape of strategies superior might help. Recently in aerospace, shipping and in approach organization aluminum and its alloys are typically used due to their valuable homes together with lightweight and better weld ability. The gift-day test pursuits to evaluate mechanical houses of AA5083 and AA6063 for one-of-a-type bevel heights and groove angle preserving root beginning normal. The specimens are organized through using the usage of V groove butt weld joints. For this Project art work, the gasoline tungsten arc welding method is selected due to the reality TIG welding is the method of turning into a member of two materials inside the presence of inert fuel with immoderate extraordinary.


N.S. Rajkumar, Srihari, “A observe of effect of groove attitude on angular distortion& effect electricity in butt weld”, International convention on mechanical engineering, December,2001.

N.Ren, M.Zan, “Constructing impact of weld & heat affected place on deformation behavior of welded tubes in numerical control bending method”, Journal on material processing technology(2012)

Rossi, E. Boniface, “Welding engineering”, Mc GrowHill Book organization New York,2012.

I. Sattari-Far, M.R Farahani, “Effect on weld groove form& pass huge variety on residual stresses in butt weld pipes”, International Journal of pressure vessel & piping (2009)

D.Akbari, I. Sattari-Far, “Effect of welding warmness enter on residual stresses in butt weld of numerous pipe joints”, International mag of stress vessel & piping (2009)

T. H. Hyde, J. A. Williams, W. Sun, “Factors, Defined from Analysis, Contributing to the Creep Performance of Weld Repairs”, Creep Performance of Weld Repairs OMMI (Vol. 1, Issue 3) December 2002.

T. H. Hyde, J. A. Williams, A. A. Becker,W. Sun, “An evaluation of the finite detail assessment of repaired welds underneath creep situations”, Review of FE analysis of repaired welds OMMI (Vol. 2, Issue 2) Aug. 20.

Shanping Lu, Hidetoshi Fujii, Kiyoshi Nogia Arc ignitability, bead safety and weld form versions for He–Ar–O2 shielded GTA welding on SUS304 stainless-steel. Journal of substances processing technology 209 (2009), P 1231–1239.

Full Text: PDF


  • There are currently no refbacks.

Copyright © 2012 - 2021, All rights reserved.|

Creative Commons License
International Journal of Innovative Technology and Research is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJITR , Permissions beyond the scope of this license may be available at