MODELING AND EXPERIMENTAL INVESTIGATION OF CRACK PROLIFERATION ON ROTOR SHAFT

K Sandhya, G Srikanth Reddy, Md Sarvar Miya

Abstract


Heavy loaded rotating additives of numerous machines (which include steam and fuel turbine, pumps, generators and excessive tempo compressor and so forth.) being diversely carried out in numerous fields which encompass a plane, vehicle, and sturdy era. The rotor shaft is taken into consideration one of the important factors of numerous rotating machines.  Due to product contamination or cyclic loading, fatigue crack often seems in the rotating shaft. Fatigue crack is considered as one of the crucial reasons for catastrophic screw, inside the rotating shaft. In a thermal machine together with steam turbines, thermal stresses, and thermal shocks also are responsible elements for excessive stress intensity which is likewise a reason of crack initiation and its propagation. In this mission the static evaluation to decide the deformation, pressure, stress to locating the electricity of the rotor, modal evaluation to decide the deformation with understand to frequencies at specific mode shapes to locating the vibrations of rotor and crack assessment to decide the J-Integral of rotor shaft for one in every of a type materials moderate metallic, alloy steels.


References


J. Wauer, On the dynamics of cracked rotors: a literature survey, Applied Mechanics Reviews forty three (1990) thirteen–17.

R. Gasch, A survey of the dynamic conduct of a clean rotating shaft with a transverse crack, Journal of Sound and Vibration one hundred sixty (1983) 313–332.

A.D. Dimarogonas, Vibration of cracked shape: a country of the artwork evaluate, Engineering Fracture Mechanics, fifty 5 (1996) 831-857.

G. Sabnavis, R. G. Kirk, M. Kasarda, D Quinn, Cracked shaft detection and analysis: a literature assessment, Shock and Vibration digest, 36 (2004) 287-296.

C.A. Papadopoulos, The stress energy release method for modeling cracks in rotors: a country of the artwork evaluation, Mechanical Systems and Signal Processing, 22 (2008) 763–789.

C. Kumar, V. Rastogi, A brief evaluation on dynamics of a cracked rotor, Inter-country wide Journal of Rotating Machinery, 2009, http://dx.Doi.Org/10.1155/2009/758108.

Sekhar, A.S., Some cutting-edge research on cracked rotors, IUTAM Symposium on Emerging Trends in Rotor Dynamics, IUTAM Conference Proceeding, 2011, pp. 491-503.

A. S. Sekhar and P. Balaji Prasad, Dynamic evaluation of a rotor device considering a slant crack inside the shaft, Journal of Soundand Vibration, 208 (1997) 457–473.

A. S. Sekhar, Vibration developments of a cracked rotor with open cracks, Journal of Sound and Vibration, 223 (1999) 497–512.

Mayes I. W., Davies W. G. R., Analysis of the Response of a Multi-Rotor-Bearing System Containing a Transverse Crack in a Rotor, Journal of Vibration, Acoustics, Stress, and Reliability in Design, 106 (1984) 139–100 45.


Full Text: PDF

Refbacks

  • There are currently no refbacks.




Copyright © 2012 - 2021, All rights reserved.| ijitr.com

Creative Commons License
International Journal of Innovative Technology and Research is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJITR , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.