Design And Analysis Of Earthquake Resistance Building On Ground Surface By Using E Tabs Software

P SOWMITHRI, A R L RAJESWARI

Abstract


In the here and now research to locate the effect of level as well as sloping ground on building efficiency ground inclines of 00 as well as 100 are taken into consideration in modeling of structures of elevation G +15 RCC structures having product buildings M40 quality for concrete and Fe500 for strengthening steel and also frameworks measurements are length = 6x10= 60m, width = 6x5 = 30m and heights of G +15 is 48m from the plinth degree, the support problems are chosen to be fixed base and also foundation deepness is thought about as 2m below the ground level structures are modeled making use of ETABS in seismic zones II, III, IV, V according to IS 1893-2002 approaches used for seismic load generation are Straight fixed analysis, Action spectrum analysis as well as Time background analysis. The results are received terms of graphs as well as tables.

References


. A.D‟Ambrisi,M.DeStefano,S.Viti “Seismic Performance of irregular 3D RC Frames”The 14th world conference on Earthquake Engineering October12-17,2008,Beijing,China.

. PankajAgrawal and Manish Shrikhande,Earthquake and vibration effect on Structure: Basic element of Earthquake Resistant Design, „Earthquake resistant design of structures, PHI Learning private limited, New Delhi

. Andreas.J.Kappos,Georgios Panagopoulos (2004) “Performance-based seismic design of 3D R/C buildings using static and dynamic analysis procedures”,ISET journal of Earthquake technology,paper no.444,vol.41,no.1,pp.141-158.

. ATC-40(1996)”Seismic Evaluation and Retrofit of concrete Buildings”,Applied Technology council,Seismic safety commission, Redwood city,California,volume 1&2.

. VinodK.Sadashiva ,Gregory A.MacRae& Bruce L.Deam.”Determination of structural Irregularity Limits-Mass irregularity Example”Bulletin of the New Zealand Society for Earthquake Engineering,Vol.42 No.4 December 2009.

. FarzadNaeimPh.D, “Performance Based seismic Engineering”,The seismic design Handbook, Research and development Los Angeles,California,pg.no. 757-792.

. IS 1983-2002(Part-1),”criteria for Earthquake resistant design of structures”,General provisions and buildings,Bureau of Indian Standards,New Delhi.

. IS 456:2000,”Plain and Reinforced concrete”- Code of practice, Bureau of Indian Standards,New Delhi.


Full Text: PDF

Refbacks

  • There are currently no refbacks.




Copyright © 2012 - 2018, All rights reserved.| ijitr.com

Creative Commons License
International Journal of Innovative Technology and Research is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJITR , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.