Email this article 
Hide
Show allCFD ANALYSIS OF DOUBLE PIPE PARLLEL FLOW HEAT EXCHANGER
Abstract
A heat exchanger is a device that is used to transfer thermal energy (enthalpy) between two or more fluids, between a solid surface and a fluid, or between solid particulates and a fluid, at distinctive temperatures and in thermal contact. Heat exchangers are important engineering devices in many process industries since the efficiency and economy of the process largely depend on the performance of the heat exchangers. The present work is directed towards the modeling of shell and tube parallel flow heat exchanger in solid works 2014 and setting up of flow simulation in solid works by inserting boundary conditions, running the calculations, inserting surface parameters, using cut plots and flow trajectories to visualize the resulting flow field .Finally compared the flow simulation results with effectiveness-NTU method. There is a difference of 7.3% of flow simulation results with effectiveness NTU method.
References
. Akshaykumar Magadum, Aniket Pawar, Rushikesh Patil, Rohit Phadtare. Mr. T. C. Mestri. “Experimental Investigation of Parallel and Counter flow Heat Exchanger”. International Journal of Advanced Research in Science, Engineering and Technology Vol. 3, Issue 3, March 2016.
. Swapnil Ahire et al. “Fabrication and Analysis of Counter Flow Helical Coil Heat Exchanger”. International Journal of Engineering Trends and Technology (IJETT) – Volume 15 Number 5, 2014.
. Alok vyas et al. “An Experimental Analysis Study to Improve Performance of Tubular Heat Exchangers” Journal of Engineering Research and Applications , Vol. 3, Issue 6, pp.1804-1809, 2013,
. Jian-Fei Zhang et al. “3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles”. International Journal of Heat and Mass Transfer 52 pp. 5371–5380, 2009
. Durgesh Bhatt et al. “Shell and Tube Heat Exchanger Performance Analysis”. International Journal of Science and Research Volume 3 Issue 9, pp. 2319-7064, 2014.
. Balaram Kundu “Beneficial design of un baffled shell-and-tube heat exchangers for attachment of longitudinal fins with trapezoidal profile”. Case Studies in Thermal Engineering 5, pp. 104–112, 2015.
. Simin Wang et al. “An experimental investigation of heat transfer enhancement for a shell-and-tube heat exchanger” Applied Thermal Engineering 29 pp. 2433–2438, 2009.
. D. A. Maheshwari and K. M. Trivedi “A Review on Experimental Investigation of U-Tube Heat Exchanger using Plain Tube and Corrugated Tube” Volume 3, Issue 4. 2015.
. K. L. Logeshan et al. “Process and Mechanical Design of Shell and Tube Heat Exchanger” International Journal of Innovative Research in Science, Engineering and Technology. Vol. 5, Special Issue 8, 2016.
. Jiangfeng Guo, et al. “Optimization design of shell-and-tube heat exchanger by entropy generation minimization and genetic algorithm” Applied Thermal Engineering, 2009.
. H. S. Dizaji, et al. “Experimental studies on heat transfer and pressure drop characteristics for new arrangements of corrugated tubes in a double pipe heat exchanger” International Journal of Thermal Sciences, 2015.
. Resat Selbas, Onder Kızılkan and Marcus Reppich, “A new design approach for shell-and-tube heat exchangers using genetic algorithms from economic point of view”, Chemical Engineering and Processing, Vol. 45, pp. 268– 275, 2006.
. K. P. Venkatesh, P. Mishra, K. Kumar, A. Krishna T M, Sreenivas H T, “Design and Analysis of a Double Spiral Counter Flow Heat Exchanger Using CFD”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 6, pp.13477-13483, June 2014.
. A text book of “Heat and Mass Transfer”, by Yunus A. Cengel. page no. 667-705.
. A text book of “Fundamentals of Heat and Mass Transfer”, by Theodorel L. Bergman and Adrienne S. Lavine. 7th edition page no. 705-748.
. A text book of “Heat Exchanger Selection, Rating and Thermal Design”, by Sadik Kakac and Hongtan Liu. 2nd edition, page no. 1-30, 283-412.
Refbacks
- There are currently no refbacks.
Copyright © 2012 - 2023, All rights reserved.| ijitr.com
International Journal of Innovative Technology and Research is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJITR , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.