EVALUATION OF HEAT TRANSFER RATE AND THEIR EFFECTS IN SPHERICAL PRESSURE VESSELS SUBJECTED TO INTERNAL PRESSURE

Sampath S S, Sawan Shetty, Chithirai Pon Selvan M

Abstract


This paper investigates the various stresses in a spherical pressure vessel which are subjected to pressure. By determining the strains and stress concentration in a vessel, overall performance of the system can be improved with the selection of suitable material. Thermal analysis is carried out to determine the deformations at various points. An improvement in the performance is achieved by using the computational analysis software ANSYS CFX and the comparative tool DOT NET software. By considering various materials, variation in the dimensions, stresses, strains and heat transfer within the system are discussed


Keywords


Pressure vessels; ANSYS CFX; DOT NET; Thermal analysis;

References


Sunil A. Patil, “Finite element analysis of optimized compound cylinder “Journal of mechanical engineering research, 2013, PP: 90-96

A. B. Ayob, M. N. Tamin, and M. Kabashi Elbasheer, “Pressure Limits of Thick-Walled Cylinders”,International MultiConference of Engineers and Computer Scientists, 2009, Vol II, PP:1-4

Harmeet Singh, Som Kumar, Nimo Singh Khundrakpam, Amandeep singh, “Thermal Stress Analysis in Butt Welded Thick Wall Cylinder”, International Journal of Engineering and Innovative Technology,2014, Vol 3, PP: 72-75

J.P.Kalejs, “Stress in thin hollow silicon cylinders grown by the edge-defined film-fed growth technique”, Journal of Crystal Growth,1990,PP: 14-19

Manjunatha.T.R, Dr. Byre Gowda.H.V, Prabhunandan.G.S,” Design and Static Structural Analysis of Cylinder and Piston of Two Stage Reciprocating Compressors Using ANSYS, 2013, vol 2, PP:7590-7596

Esmail M.A. Mokheimer, “Performance of annular fins with different profiles subject to variable heat transfer coefficient” International Journal of Heat and Mass Transfer, 2002, PP: 3631-3642

Pankaj N. Shrirao, Rajeshkumar U.Sambhe, Pradip R.Bodade,” Convective Heat Transfer Analysis in a Circular Tube with Different Types of Internal Threads of constant Pitch”, International Journal of Engineering and Advanced Technology, 2013, Vol 2, PP 335-340

Ashish Giri, Evaluation of the Performance of Annular Composite Fin using ANSYS, International Journal of Computer Applications, 2012, Vol 44, PP 4-7

Denpong Soodphakdee, Masud Behnia, and David Watabe Copeland, “A Comparison of Fin Geometries for Heat sinks in Laminar Forced Convection: Part I - Round, Elliptical, and Plate Fins in Staggered and In-Line Configurations” The International Journal of Microcircuits and Electronic Packaging, 2001, Vol 24, PP 68-76.


Full Text: PDF

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright © 2012 - 2023, All rights reserved.| ijitr.com

Creative Commons License
International Journal of Innovative Technology and Research is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJITR , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.